Reference Markers
Adhesive Targets for Precision 3D Measurement
3D scanners and hand-held laser scanners use reference markers, or adhesive targets, to help increase the accuracy of each scan orientation. The need for targets depends on the project and part. Using reference markers is especially helpful for parts that need to be fully digitized by flipping the part upside down. ZEISS technology uses minimal targets, and these reference markers are precisely sized and printed. Customers who prefer not placing reference markers onto a part's surface use premeasured Reference Frames. These frames have targets on the frame, and the part is positioned inside. The Reference Frame is not part-specific, so it can be used with many different parts that are relatively the same size. In addition, the cost of building a Reference Frame is inexpensive. If you would like more information on Reference Frames, please reach out to .
Most reference markers come with three adhesive selection options:
- Low
- Medium
- High (temperature stable up to 120°C)
Purchase
Taxes are applied to purchases shipped to the following states: California, Connecticut, Michigan, North Carolina, and Washington.
Prices include ground shipping to the lower 48 states. For expedited requests, please email . If, for some reason, you would like to return these Reference Markers, please reach out to . Returns are subject to a 10% restocking fee plus the shipping and handling charges.
Reference marker orders are fulfilled from our California, Michigan, or North Carolina facilities.
|
|
|
0.4 mm, uncoded, white uncoded white point markers inner diameter 0.4 mm / outer diameter 1.9 mm round, on adhesive foil in a box 3000 single point markers per box TU-35230 = medium TU-35231 = high |
0.8 mm, uncoded, white uncoded white point markers inner diameter 0.8 mm / outer diameter 2.5 mm round, on adhesive foil in a box 3000 single point markers per box TU-35233 = medium TU-35234= high |
1.5 mm, uncoded, white uncoded white point markers inner diameter 1.5 mm / outer diameter 3.5 mm round, on adhesive foil in a box 3000 single point markers per box TU-35235 = low TU-35236 = medium TU-35239= high |
3.0 mm, uncoded, white uncoded white point markers inner diameter 3.0 mm / outer diameter 7.0 mm round, on adhesive foil as tear-off pad 3000 single point markers per pad TU-35240= low TU-35241 = medium TU-35242= high |
5.0 mm, uncoded, white uncoded white point markers inner diameter 5.0 mm / outer diameter 10.0 mm round, on adhesive foil as tear-off pad 3000 single point markers per pad TU-35243= low TU-35244= medium TU-35245= high |
8.0 mm, uncoded, white uncoded white point markers inner diameter 8.0 mm / outer diameter 16.0 mm round, on adhesive foil as tear-off pad 1500 single point markers per pad TU-35246= low TU-35247= medium TU-35248= high |
12.0 mm, uncoded, white uncoded white point markers inner diameter 12.0 mm / outer diameter 24.0 mm round, on roll 5000 single point markers per pad TU-12060= easy removable |
18.0 mm, uncoded, white uncoded white point markers inner diameter 18.0 mm / outer diameter 36.0 mm round, on adhesive foil 1000 single point markers per pad TU-14913= easy removable |
25.0 mm, uncoded, white uncoded white point markers inner diameter 25.0 mm / outer diameter 50.0 mm round, on adhesive foil 1000 single point markers per pad TU-14913= permanent adhesive |