After an extensive evaluation of competitive systems, we have implemented over a dozen ATOS Scanning systems at 9 of our manufacturing sites. We chose the ATOS systems based on Accuracy, Repeatability, Speed and the Support we received from Capture 3D. A conventional inspection of 500 items including 8 sections and setup would typically take 65 hours. We've been able to reduce that inspection time to under an hour and provide more detail in the process. Typical measurement of 'Trip Strips' has been reduced from 45 hours to 8 hours. Some of our key applications for ATOS have been 1st Article Inspection, In-Process Verifications, Core Inspections and Coating Evaluations.