Request a Demo!
1000 characters left

logo-gom-small

 

GOM Reference Markers

Adhesive Targets for Precision 3D Measurement

Purchase Online

 

3D scanners and hand-held laser scanners use reference markers, or adhesive targets, to help increase the accuracy of each scan orientation. The need for targets depends on the project and part. Using reference markers is especially helpful for parts that need to be fully digitized by flipping the part upside down. GOM technology uses minimal targets, and GOM reference markers are precisely sized and printed. Customers who prefer not placing reference markers onto a part's surface use premeasured Reference Frames. These frames have targets on the frame, and the part is positioned inside. The Reference Frame is not part-specific so, it can be used with many different parts that are relatively the same size. In addition, the cost to build a Reference Frame is inexpensive. If you would like more information on Reference Frames, please reach out to

Most reference markers come with three adhesive selection options: 

  1. Low
  2. Medium
  3. High (temperature stable up to 120°C)

 

Purchase

Taxes are applied to purchases shipped to the following states: California, Connecticut, Michigan, North Carolina, and Washington. 
Prices include ground shipping to the lower 48 states. For expedited requests, please email

Reference marker orders are fulfilled from our California, Michigan, or North Carolina facilities. 

Step 1: Select Reference Markers
 
Step 2: Adhesive for 0.4 mm to 8 mm targets. Sizes 12 mm and larger do not require adhesive selection.
 
Step 3: Your Company Name

 

Reference Marker Options

consumables reference markers 0.4mm 

consumables reference markers 0.8mm

consumables reference markers 0.8mm
0.4 mm, uncoded, white
uncoded white point markers
inner diameter 0.4 mm / outer diameter 1.9 mm
round, on adhesive foil in a box
3000 single point markers per box
TU-35230 = medium 
TU-35231 = high 
0.8 mm, uncoded, white
uncoded white point markers
inner diameter 0.8 mm / outer diameter 2.5 mm
round, on adhesive foil in a box
3000 single point markers per box
TU-35233 = medium 
TU-35234= high  
1.5 mm, uncoded, white
uncoded white point markers
inner diameter 1.5 mm / outer diameter 3.5 mm
round, on adhesive foil in a box
3000 single point markers per box
TU-35235 = low
TU-35236 = medium 

TU-35239= high  
consumables reference markers 3.0mm consumables reference markers 5.0mm consumables reference markers 8.0mm 
3.0 mm, uncoded, white
uncoded white point markers
inner diameter 3.0 mm / outer diameter 7.0 mm
round, on adhesive foil as tear-off pad
3000 single point markers per pad
TU-35240= low
TU-35241 = medium 

TU-35242= high  
5.0 mm, uncoded, white
uncoded white point markers
inner diameter 5.0 mm / outer diameter 10.0 mm
round, on adhesive foil as tear-off pad
3000 single point markers per pad
TU-35243= low
TU-35244= medium 

TU-35245= high  
 8.0 mm, uncoded, white
uncoded white point markers
inner diameter 8.0 mm / outer diameter 16.0 mm
round, on adhesive foil as tear-off pad
1500 single point markers per pad
TU-35246= low
TU-35247= medium 

TU-35248= high  
     
consumables reference markers 12.0mm consumables reference markers 18.0mm consumables reference markers 25.0mm 
 12.0 mm, uncoded, white
uncoded white point markers
inner diameter 12.0 mm / outer diameter 24.0 mm
round, on roll
5000 single point markers per pad
TU-12060= easy removable
  18.0 mm, uncoded, white
uncoded white point markers
inner diameter 18.0 mm / outer diameter 36.0 mm
round, on adhesive foil
1000 single point markers per pad
TU-14913= easy removable
25.0 mm, uncoded, white
uncoded white point markers
inner diameter 25.0 mm / outer diameter 50.0 mm
round, on adhesive foil
1000 single point markers per pad
TU-14913= permanent adhesive

 

 

© Copyright 2021. Capture 3D, Inc. All Rights Reserved.